Medical Enviromental Blogs
These are the first of many questions I will have, but I know your company have supplied cremators to other New Zealand businesses. We are starting a business of providing a incineration services, hospitals, Labs, textile industry, pesticides, chemical, paint, pharmaceutical waste. We would be dealing in about 10-12 tons of waste per day for […]
Burning Capacity: 400kg/ Hr ( Maximum Combustion time is 6 times/ Day) Chimney External Diameter: not more than 400mm Fan Power: must not exceed 1.1kw Voltage: 220V Oil Consumption: Must not exceed 14kg/hr Feeding Door Width: not less than 1000x1300mm Incineration Temparature: 800 Degree or above Emission: CO- Must not exceed 100mg/m3 SO2- Must not […]
start with Solid waste (Domestic, Hospital ,General) Incineration-500Ton per Day Need By products energy, gas, and compost No pollution, Smoke, Sound, Smell Waste to be segregated During the manufacturing and after packing, we generates some waste like, chicken bones, some fried products, vegetable waste, biscuits, chocolates (Paste), Plastics, foils, packaging materials, etc. We normally separate […]
I would also want to ask if you have a bigger capacity like 100 KG/H medical waste incineration,medical waste incinerator price,mobile incinerators if so give us the quotation. I did get the information about the A900. Thank you very much. I have some more questions around setting up facility before the crematory arrives, I hope […]
Incinerator dual chamber with capacity 1.5 m3/batch or 6 m3/ day, digital thermocontrol range 0‐1200 C, thermocouple, air supply capacity 10m3/ minute, power consumption 1.2kWH/ hour, power 3 phase with netral, cooling water sprinkler capacity 5L/ minute, completed with refractory (insulation, castable, ceramic blanket) and PLC Customers often ask us to supply Wet or Dry […]
Dual Chamber (Primary & Secondary) with insulation slabs (fully insulated internal refractory lining) along with controlled air blower for each chamber Insulation / Refractory Thickness: ≥ 100mm Chamber plate thickness: ≥ 6mm Fuel Type: Natural gas based on burning fuel in combustion chambers Waste Capacity: ≈ 150 Kg/Day Incineration capacity: ≈ 25 Kg/Day (Separate waste […]
Incinerator for project waste management (Utilisation needle and syringes, disposable laboratory consumables, used tests and other pharmaceutical products) Combustion Chamber Volume: (m3) 0.13m3; Burn Rate: up to 20kg per hour; Average Fuel Consumption: 5 kg per hour; Operational Temperature: 850 – 1320°C Gas Retention in Secondary Chamber: 0.5 secs; Temperature Monitoring: Yes; Average ash residue […]
We are looking for MEDICAL WASTE INCINERATOR, hazardous waste incinerators,laboratory incinerator,medical waste incinerators manufacturers, 100 kg/hr. If you have the same, please send us your best offer with full specification. We received the pictures for the burner fuel installation. The pictures show the fuel lines up to the burners covers but not the actual proper […]