hospital waste incinerator

One of our customers is asking for Industrial Incinerator to destroy
the pharmaceuticals waste like Alu, PVC,PVDC etc.
– capacity: 300-400 kg/hour medical incinerator,hospital waste incinerator,1 kg incinerator
– Fuel syetem: Dual fuel( both oil and gas)
Incinerator with oil burner
Capacity 2 ton/day, Oil tank 300 l Oil pump 0.4Kw , Burner 0.2Kw
Model : YD Series
Country of Origin : ITALY
– Diesel incinerator.

– 25Kg/h. It will have mainly paper, cardboard and food, though also it will incinerate medical waste. So the incinerator shall be able to handle organic and hazardous waste.

– Spare parts for one year.

– The design should prevent any release of polluting substances into soil, surface water and groundwater.

– Combustion zone has to reach at least 860 degrees under the most adverse conditions with at least 6% oxygen. Since it will treat hazardous and organic waste, temperature has to reach at least 1100 degrees for at least 2 second.

– Flue gases must be cooled to 200 degrees or lower before flue gas treatment. The flue gas cleaning equipment maust be at least two-field electrostatic precipitator/ESP, dust <30mgNm3.

– Thermal efficiency not less than 85%.

– It should be equipped with filter to reduce and contain pollutants from organic and medical waste.

– Easy to operate for almost unskilled workers.
We are an environmental services company and want to buy a medical waste incinerator that can burn up to 20kg/hr of medical waste.