Medical Enviromental Blogs
Items/Model TS30(PLC) TS50(PLC) Burn Rate 30 kg/hour 50 kg/hour Feed Capacity 60kg 100kg Control Mode PLC PLC Combustion Chamber 330L 560L Internal Dimensions 75x75x60cm 100x80x70cm Secondary Chamber 180L 280L Smoke Filter Chamber Yes Yes Feed Mode Manual Manual Voltage 220V 220V Power 0.5Kw 0.7Kw Oil Consumption (kg/hour) 10.2–20 12.1–24 Gas Consumption (m3/hour) 9.8–20 9.9–26.1 Temperature […]
Waste type: health care waste Waste density: 125 to 350Kg/M3 Waste calorific value: 4000KCAL/kg Moisture content: 10 – 25% Estimated ash residue: 5 – 10% Nominal capacity: 50kg/hr batch load Secondary chamber: 2 seconds@850?C Environmental: NEMA ACT (EMCA) 1999, Waste Management regulations, 2006 Primary Combustion chamber: The primary combustion chamber is the main structure of […]
Incinerators to be suitable for the professional disposal of clinical & medical waste / garbage with a higher load capacity in the range of approximately 1000-1500 Kg. The durable, self-contained incinerators shall offer an effective and highly efficient, safe disposal and to be manufactured according to applicable international directives, e.g. CE, EU, etc. Type of […]
hazardous waste high temperature incinerators for the treatment of hazardous wastes. The waste will be mixed, including medical, oily wastes, woods and laboratory wastes. Primary combustion Diesel/LPG/LNG burning primary combustion chamber/primary combustion zone Secondary combustion Residence time in the secondary chamber not less than 2 seconds Both primary and the secondary temperatures maintained until all […]
Equipment Double chamber medical infectious waste incinerator Capacity 10-30 kg per hour Characteristics of waste Mainly syringes and needles from immunization routine and campaign activities. However, the following average characteristics are considered*: heating value above 2000 kcal/kg (8370 kJ/kg); content of combustible matter above 60%; content of non combustible solids below 5%; content of […]
Primary and secondary burners: Separate electrically spark-ignited primary burners and secondary burners with automatic control shall be used to achieve the specified temperature requirements in the primary and secondary chambers. The flames of the primary and secondary burners shall not impinge on the incinerator walls or floor. The primary combustion chamber must: 1. Be accepted […]
medical waste incinerator solutions and prices for 100 bed / 500 bed / 1000 bed / 3000 bed hospitals. – Assumption: general hospital beds 50%, operation beds 50% for the 100 bed hospital case, while this ratio is 30-70% for the other cases – international standards and waste creations assumptions should apply INCINERATOR, DIESEL. CAPACITY […]
We strive for a sustainable development therefore we are adopting a sustainable medical waste management system, which includes building a modern sustainable incinerator that will not only cater for our facility but also for the other facilities in the larger area of the region. We are aware that we need a modern incinerator that will […]