We are in need of an incinerator for burning hazardous waste and chemicals.We are into disposing all waste which is coming from offshore exploration.We need to have an emission free smokeless exhaust.There should be primary and secondary chambers and with auto feed and auto eject of ash.
We are the Municipal Directorate of Helah in Maputo, Mozambique.
The Municipal authorities are facing problems in biological waste management, more clearly in the pet dispose.
So, we found out that you are capable of supplying the equipament for this purpose.
The Directorate are asking you to give a quatation for incinerator, TS50 (PLC), pet cremation prices,animal incinerator cost,hospital incinerator manufacturers.
We still have to issues which we would like you to amend on paper before we can bid for the tender. Since in the brochure there is only the mention of the incinerator model TS50(PLC) but we will be offering the TS50(PLC-M), we would like that you write a letter with your letterhead indicating the model being offered and the two major differences to the one mentioned in the catalogue i.e.
The size of the combustion chamber being 1200x800x800mm with a volume of 1,30 liters
The size of the chimney indicated in the catalogue for the model TS50(PLC) is 5 meters but we will be offering the model TS50(PLC-M) with a total chimney height of 10 meters (chimney 7 meters and incinerator main body 3.8 meters)
4 units of Diesel Medical Waste Incinerators

2 chambers

Nominal Capacity: 50kg/hour batch load
We have a few questions regarding the logistics we have to put up as the locations for the installation of the incinerators are many kilometres apart from each other. That means we have to at least calculate with a day’s journey to each new site.
How many incinerators fit in a 40ft container? The price is CIF but we need to know cause of clearing the goods from port and logistics from site to site.
Each incinerator is now 7,000 kg (7,0 to). We will need a crane that can lift such a weight. What othermachine would be required to move the incinerator?
How long do the engineers need for installing, commissioning and training for one incinerator.
What kind of help personel (electricians or plumbers) and equipment will the engineers need on site?
c.) in the tech. answer and one item request: Approximate dimensions 800 mm diameters x 2100mm long. we think this should be primary chamber inside chamber but do not confirm. this chamber size is much bigger than our model TS50 PLC, and it is not reasonable . we can make this size but then the equipment is different and price too high.